Love this. I have a pile of nice Cygolites (both front and tail) that my whole family uses that are maybe 8 or 9 years old. Their capacities have largely dropped to the point that I need to charge them every ride or two. Maybe get about 90 minutes of use, down from 3-4 hours previously.
They're not user-serviceable by design but I've been pondering cracking them open and having a go at swapping the batteries. This post may inspire me.
I've got a pile of new 18650s lying around and hopefully the front lights use those!
esquire_900 2 hours ago [-]
In the Netherlands many people use these kinds of detachable bike lights. I've never came across soldered batteries in the dozen or so I've replaced batteries for. Not always cheaper, but just tossing the whole thing seems like such a waste.
Well done!
cubefox 2 hours ago [-]
There are also dynamo powered LED lights which only provide light while riding the bike, and about a minute afterwards (I assume from an internal capacitor). They are not detachable but why would that be necessary? From what I can tell they also don't require regular replacement.
Aurornis 51 minutes ago [-]
A reliable dynamo hub setup can be very cool for the right situation, but the up front investment to rebuild your wheel around a dynamo hub is expensive. The power output is also on the low side compared to the light output you can get from the battery units.
Not having to charge anything or worry about batteries running out in the dark is a real benefit.
It's all on the very opposite end of the cost spectrum than the cheap bike light in this post though
They're just generic DC motors held against the rim, as simple and cheap as it gets.
kccqzy 2 hours ago [-]
These are fine for bike commuters, and I’ve had them before. But they are in general not fine for recreational bicyclists; these people would gladly pay a hundred dollars for a new tire to shave off three watts and are not about to add any unnecessary human-powered accessories.
bootlooped 2 hours ago [-]
An exception is bikepackers, who may prize reliability and runtime over brightness and weight. But then the dynamo we're talking about is $200-$400 and that's not including the light.
implements 58 minutes ago [-]
Though you can get Shimano Dynohubs pretty cheaply:
> An exception is bikepackers, who may prize reliability and runtime over brightness and weight. But then the dynamo we're talking about is $200-$400 and that's not including the light.
No, it's about a tenth of that, light included.
dragontamer 1 hours ago [-]
I wouldn't worry about matching the exact model number of the battery. Instead, it's more important to get roughly the same chemistry and a capacity equal or maybe a touch greater (if technology improved in the last 10 years, capacity could be greater with modern parts).
Specific batteries go in and out of production. But as long as it's the same CHEMISTRY, voltage, and capacity, it's likely compatible. Chemistry tends to set the voltage, size sets the capacity.
Charge/discharge controllers and algorithms are based on these three bits of info.
In some cases, some chemistries are actually compatible with other chemistries. NiHM cells are largely backwards compatible with Ni-Cd chargers (but not vice versa). It's not good for the NiHM but they will actually take the charge.
bestham 46 minutes ago [-]
The chemistry set the voltage and the voltage and the size set the capacity. Everything else equal, a larger capacity battery is often compatible with an original smaller capacity battery in a given device because the charge current will be lower in relation to the capacity.
zoomablemind 25 minutes ago [-]
On the subject of bike lights. Most of the current lights appear to use some LEDs which makes sense, of course. However the brightness of output light looks like completely unregulated.
On so many occasions I would get blinded by overly bright lights of an incoming cyclist during late evening ride.
picture 21 minutes ago [-]
That seems like an intentional design choice as truly unregulated LEDs without even ballast resistors will burn out.
It's probably this way because companies design products to cater to their customers, who would likely prefer a Damn Bright Light to feel like they got their money's worth.
Mawr 5 minutes ago [-]
It's not a brightness thing, after all car headlights are probably 1000x brighter than anything you may have on your bike.
It's because 99% of bike lights are basically just flashlights, spraying light everywhere. The solution is the same as for cars — lights with horizontal cut-offs.
mytailorisrich 14 minutes ago [-]
Probably depends on jurisdiction. E.g. in the UK there is no formal limit (and car headlights are more powerful than bikes') but light must not dazzle or cause glare to other road users, hence why headlights on full beam must only be used in certain circumstances, and beams in general must have specific orientation.
So if you are blinded by an incoming cyclist this is not legal... of course enforcement is another matter.
mooshx 1 hours ago [-]
Thanks for sharing this. It's nice to see something not immediately turned into landfill junk. I ran into a similar issue awhile ago, and was able to replace the battery too. Not trivial, but very satisfying. Here's that journey: https://www.mooshwerks.com/2024/11/09/bike-light-hack/
beej71 38 minutes ago [-]
I recently had an even easier time changing the rechargeable battery in some mini Christmas lights. The unit was a solar panel in a box held by 4 screws. Took them out, and it was a regular AA nimh just slotted in there. Changed it out and the thing worked again.
I wonder how many people just chucked the unit when the battery wore out.
sandworm101 30 minutes ago [-]
I just bought the Steam Frame, valve's new VR headset. After hunting for a USB port on the paddles i was shocked to find how eaily it is to replace thier batteries. They are Duracell AA.
aenis 1 hours ago [-]
I know it's slightly offtopic, but the brand I am using - ExposureLights - offers a battery diagnosis/replacement service for their bicycle lights.
Those are on the expensive side, but still, most brands would rather sell you a new one.
rollulus 1 hours ago [-]
I don’t know what it is with Julia’s writing but it always makes me happy. It reminded me of replacing the soldered battery in Super Metroid so I could save my progress again. As a cheapskate I used a regular battery and connected the wires mechanically.
thirtygeo 1 hours ago [-]
Love to see MEC gear - but I wish it were more repair friendly!
32 minutes ago [-]
sandworm101 2 hours ago [-]
Talk about burying the lead. This was a MEC bike light. It should have a replacable battery!
Ah, memories. I miss the old MEC, before they overextended on real estate and had to sell the farm to private equity. I have a pile of MEC branded gear I'm still happily using 20 years on. I have some restrained hopes for the new ownership group to bring it back, but I'll always miss the co-op.
These lights would have predated the private equity era but I'm guessing sourcing options were somewhat more limited back in 2016.
sandworm101 1 hours ago [-]
The best motorcycle sunglasses i every bought were mec, from the vancouver store in around 2005. Flat sided (for helmets) with interchangable lenses, and seriously dark lenses too. But when I walked in, in full sportbike leathers, i got more than a few dirty looks.
giglamesh 55 minutes ago [-]
Did we not just see the battery replaced? ;)
bt_hn_c_3077 28 minutes ago [-]
[dead]
bt_hn_b_9489 1 hours ago [-]
[dead]
bt_hn_b_9489 1 hours ago [-]
[flagged]
Rendered at 16:47:17 GMT+0000 (Coordinated Universal Time) with Vercel.
They're not user-serviceable by design but I've been pondering cracking them open and having a go at swapping the batteries. This post may inspire me.
I've got a pile of new 18650s lying around and hopefully the front lights use those!
Well done!
Not having to charge anything or worry about batteries running out in the dark is a real benefit.
It's all on the very opposite end of the cost spectrum than the cheap bike light in this post though
They're just generic DC motors held against the rim, as simple and cheap as it gets.
https://www.sjscycles.co.uk/hubs-front/shimano-nexus-dhc3000...
Dynohub history rabbit hole for those interested:
https://www.sheldonbrown.com/dynohubs.html
No, it's about a tenth of that, light included.
Specific batteries go in and out of production. But as long as it's the same CHEMISTRY, voltage, and capacity, it's likely compatible. Chemistry tends to set the voltage, size sets the capacity.
Charge/discharge controllers and algorithms are based on these three bits of info.
In some cases, some chemistries are actually compatible with other chemistries. NiHM cells are largely backwards compatible with Ni-Cd chargers (but not vice versa). It's not good for the NiHM but they will actually take the charge.
On so many occasions I would get blinded by overly bright lights of an incoming cyclist during late evening ride.
It's probably this way because companies design products to cater to their customers, who would likely prefer a Damn Bright Light to feel like they got their money's worth.
It's because 99% of bike lights are basically just flashlights, spraying light everywhere. The solution is the same as for cars — lights with horizontal cut-offs.
So if you are blinded by an incoming cyclist this is not legal... of course enforcement is another matter.
I wonder how many people just chucked the unit when the battery wore out.
Those are on the expensive side, but still, most brands would rather sell you a new one.
https://www.mec.ca/en/explore/sustainability-innovation
These lights would have predated the private equity era but I'm guessing sourcing options were somewhat more limited back in 2016.